X19D Silicon Piezoresistive Differential Pressure Sensor
Product overview
The X19D silicon piezoresistive differential pressure sensor is a key component for pressure sensors and transmitters. With small range and high performance, it is easy for signal amplification and assembled into standard output transmitters.
Encapsulated with a diffused silicon chip in a 316L stainless steel housing, the core bears direct pressure on both sides of the chip. Its all-solid-state structure ensures accurate differential pressure measurement, suitable only for clean non-corrosive gas.
It adopts O-ring sealing for easy installation, with overall dimensions compatible with overseas products for good interchangeability. We also offer customization including diaphragm sensing structure, wide temperature compensation and high-reliability pressure sensors.
Features
■ Small range
■ Constant current excitation
■ Highly reliable imported pressure die
■ Wide temperature range compensation
■ Oil-free
■ The compensated board with glue for moisture-proof protection
■ Standard Φ19mm, customization for other diameter
■ 316L material for all metal
■ High performance, high reliability
■ Steel mesh for impurity filtration
■ 18 months guarantee
Applications and industries
■ Process control systems
■ Pressure calibration instruments
■ Refrigeration equipment and HVAC control
■ Gas pressure measurement
■ Biomedical instruments
■ Pressure measuring instrument
Product Parameters
Electrical performance parameters | |
| Pressure range | -10kPa~10kPa |
| Pressure reference | Different pressure |
| Excitation | 1.5mA or 10V |
| Input impedance | 2kΩ~5kΩ |
| Electrical connection | Silicon soft wire |
| Compensated temp. range | 0ºC ~ 50ºC |
| Operating temp. | -20ºC ~ 85ºC |
| Storage temp. | -20ºC ~ 85ºC |
| Insulation resistance | ≥200MΩ/250VDC |
| Response time | ≤1ms (up to 90%F.S.) |
| Measured medium | Clean and non-corrosive gas |
| Mechanical vibration | 20g (20~5000Hz) |
| Shock | 100g/10ms |
| Service life | 1×106 (cycles) |
Structural performance parameters | |
| Housing material | 316L |
| Sealing ring material | NBR |
Basic parameters | ||||||
| Item | Condition | Min | Typical | Max | Unit | Note |
| Non-linearity | -2.0 | ±1 | 2.0 | %F.S. | Note ⑴ | |
| Hysteresis | -0.05 | ±0.03 | 0.05 | %F.S. | ||
| Repeatability | -0.05 | ±0.03 | 0.05 | %F.S. | ||
| Zero output | -2 | ±1 | 2 | mV | ||
| Full scale output, 1.5mA, 100Pa | 7 | 15 | 25 | mV | ||
| Full scale output, 1.5mA, 250Pa | 10 | 30 | 50 | mV | ||
| Full scale output, 1.5mA, 500Pa | 10 | 20 | 35 | mV | ||
| Full scale output, 1.5mA, other range | 20 | 35 | 70 | mV | ||
| Zero temp. drift, 100Pa | -10 | ±5 | +10 | %F.S. | ||
| Zero temp. drift, 250Pa | -5 | ±3.5 | +5 | %F.S. | ||
| Zero temp. drift, 500Pa | -3 | ±2 | +3 | %F.S. | ||
| Zero temp. drift, other range | -2 | ±1.5 | +2 | %F.S. | ||
| Sensitivity temp. drift, <1kPa | -5 | ±3.5 | 5 | %F.S. | ||
| Sensitivity temp. drift, other range | -2 | ±1.5 | 2 | %F.S. | ||
| Long-term stability | -0.3 | ±0.2 | 0.3 | %F.S./Year | ||
Note:
⑴ Calculate according to BFSL least square method.
⑵ Within the compensated temperature range 0ºC ~ 50ºC, the temperature is 30ºC for reference.
⑶ After measuring pressure under the high and low temperatures, return to the reference temperature.
Production process





Testing Equipment




Certificate

Company profile

Nanjing Wotian Technology Co., Ltd. was established in 2005. It is an outstanding top sensor manufacturing enterprise in Jiangning District. The company was rated as Nanjing Engineering Technology Research Center and Nanjing Municipal Engineering Research Center, Nanjing Enterprise Technology Center, Nanjing Postdoctoral Innovation Demonstration Base; is the unit that formulated the national standards for "Silicon Piezoresistive Pressure Sensitive Chips" and "Silicone Pressure Sensors". It is the leading domestic manufacturer of pressure sensors, with core technology of diffused silicon pressure sensor pressure transmitter, level sensor and temperature sensor and existing staff over 600. The annual production of pressure sensors is more than 4.5 million. The products have been exported to more than 80 countries and regions. Nanjing Wotian was awarded the honorary title of "Sensor Application Program Demonstration Enterprise" by the Ministry of Industry and Information Technology in 2019. "Creating value for customers" is the goal that enterprises always pursue. As leading manufacturer in the domestic pressure sensor industry, the company will revitalize China's pressure sensor business as its own responsibility, work diligently, step by step, strive to make pressure sensors better, and provide customers with cost-effective sensors. Nanjing Wotian Technology Co., Ltd. has passed ISO9001-2015 quality management system certification and TS16949 certification for the automotive industry.
Company advantage
Mass production
We have one production center in Nanjing and one production center in Anshan with 25,000㎡ plant and over 1000 units of production equipments. The main annual capacity of sensors is over 4,500,000 pieces.
Imported equipments
We have imported more than 20 sets of pressure controllers for our production line.
Informatization management
We have the information management system of CRM, PLM, ERP, MES and DINGDING etc.
Comprehensive testing
We have our own lab and testing equipment such as lightning stroke, surging, static electricity, vibration, high-low temperature impact test and helium mass-spectrum leak detection.



