Nanjing Wotian Technology Co., Ltd.

Pressure sensor manufacturing for 20 years.

You are here: WT Home > Products > Diffused Silicon Pressure Sensors

  • P19F Pressure Sensor
  • P19F Pressure Sensor
  • P19F Pressure Sensor
  • P19F Pressure Sensor

P19F Pressure Sensor

Product overview

The P19F pressure sensor is a core component for manufacturing pressure transmitters. As a high-performance pressure-sensitive element, it can be easily conditioned and assembled into transmitters with standard signal output.

The P19F pressure sensor encapsulates a diffused silicon pressure-sensitive die within a 316L stainless steel housing. Applied pressure is transmitted to the sensor die via the stainless steel diaphragm and internally sealed silicon oil. The sensor die does not come into direct contact with the measured medium, forming a diaphragm pressure measuring structure. Therefore, this product can be used in a wide range of applications, including harsh environments with corrosive media.

The P19F sensor adopts an O-ring for pressure sealing, facilitating easy installation.

Features

■ Constant current excitation

■ Highly reliable imported pressure die

■ Wide temperature range compensation

■ Standard Φ19mm, customization for other diameter

■ All SS316L material

■ High performance, high reliability

■ 18 months guarantee

Applications and industries

■ Process control systems

■ Pressure calibration instruments

■ Refrigeration equipment and HVAC control

■ Hydraulic systems and valves

■ Level measurement

■ Biomedical instruments

■ Ships and navigation

■ Aircraft and avionics system

Product Parameters

Electrical performance parameters

Pressure range0~10kPa…60MPa
Pressure referenceGauge pressure, Absolute pressure, Sealed gauge pressure
Excitation1.5mA recommended for constant current
Input impedanceConstant current: 2kΩ~5kΩ
Electrical connectionGold-plated KOVAR pins or silicon wires
Compensated temp. range0ºC ~ 60ºC (≤70kPa); -10ºC ~ 70ºC (other ranges)
Operating temp.-40ºC ~ 120ºC
Storage temp.-40ºC ~ 125ºC
Insulation resistance≥200MΩ/250VDC
Response time≤1ms (up to 90%F.S.)
Measured mediumAll the liquids and gases which are compatible with SS 316L.
Mechanical vibration20g (20~5000Hz)
Shock resistance100g (10ms)
Service life1×106 (cycles)

Structural performance parameters

Diaphragm materialSS316L
Housing materialSS316L
Oil fillingSilicon oil
Sealing ring materialNBR or FKM

Basic parameters

ItemConditionMinTypicalMaxUnitNote
Non-linearity-0.3±0.20.3%F.S.Note ⑴
Hysteresis-0.05±0.030.05%F.S.
Repeatability-0.05±0.030.05%F.S.
Zero output-2±12mV
Full scale output, 1.5mA (10kPa)3090mV
Full scale output, 1.5mA (other ranges)60150mV
Zero temp. drift, 10kPa-2±1.52%F.S.
Zero temp. drift, other ranges-1.5±0.751.5%F.S.
Sensitivity temp. drift-1.5±0.751.5%F.S.
Thermal hysteresis-0.075±0.050.075%F.S.
Long-term stability-0.3±0.20.3%F.S./Year

Note:
⑴ Calculate according to the BFSL least square method. Negative pressure range is calculated in segments.
⑵ Within the compensated temperature range 0ºC ~ 60ºC(≤70kPa) or -10ºC ~ 70ºC(other ranges), the middle point temperature is 30ºC for reference.
⑶ After measuring pressure under the high and low temperatures, return to the middle point temperature.

Production process


P19F pressure sensor production processP19F pressure sensor production process

P19F pressure sensor production processP19F pressure sensor production process

P19F pressure sensor production processP19F pressure sensor production process


                                                     Testing Equipment


P19F pressure sensor testing equipmentP19F pressure sensor testing equipment

P19F pressure sensor testing equipmentP19F pressure sensor testing equipment




Certificate



P19F pressure sensor certificate

Company profile

Nanjing Wotian Technology pressure sensor factory

Nanjing Wotian Technology Co., Ltd. was established in 2005. It is an outstanding top sensor manufacturing enterprise in Jiangning District. The company was rated as Nanjing Engineering Technology Research Center and Nanjing Municipal Engineering Research Center, Nanjing Enterprise Technology Center, Nanjing Postdoctoral Innovation Demonstration Base; is the unit that formulated the national standards for "Silicon Piezoresistive Pressure Sensitive Chips" and "Silicone Pressure Sensors". It is the leading domestic manufacturer of pressure sensors, with core technology of diffused silicon pressure sensor pressure transmitter, level sensor and temperature sensor and existing staff over 600. The annual production of pressure sensors is more than 4.5 million. The products have been exported to more than 80 countries and regions. Nanjing Wotian was awarded the honorary title of "Sensor Application Program Demonstration Enterprise" by the Ministry of Industry and Information Technology in 2019. "Creating value for customers" is the goal that enterprises always pursue. As leading manufacturer in the domestic pressure sensor industry, the company will revitalize China's pressure sensor business as its own responsibility, work diligently, step by step, strive to make pressure sensors better, and provide customers with cost-effective sensors. Nanjing Wotian Technology Co., Ltd. has passed ISO9001-2015 quality management system certification and TS16949 certification for the automotive industry.



Company advantage

Mass production

We have one production center in Nanjing and one production center in Anshan with 25,000㎡plant and over 1000 units of production equipments. The main annual capacity of sensors is over 4,500,000 pieces.

Imported equipments

We imported 20 sets of pressure controller and 150 units of testing ovens to our production line.

Informatization management

We have the information management system of CRM, PLM, ERP, MES and DINGDING etc.

Comprehensive testing

We have our own lab and testing equipment such as lightning stroke, surging, static electricity, vibration, high-low temperature impact test and helium mass-spectrum leak detection.