Pусский 
Pressure Sensor with thread PC12Ⅲ
Features
■Imported highly reliable pressure die
■Compensation board filled with glue for protection against moisture
■All stainless steel housing material
■High accuracy, high reliability
■12 months warranty period
Applications
■Glue
■Environmental protection, chemical, coating
■Polyurethane equipment
■Industry standards supporting
Product Parameters
Electrical performance parameters | ||
Pressure range | 0～100kPa…6MPa | |
Pressure reference | Gauge pressure, Absolute pressure, Sealed gauge pressure | |
Excitation | 1.5mA recommended for constant current; 10V for constant voltage. | |
Input impedance | Constant current: 2kΩ～5kΩ; constant voltage: 3kΩ～12kΩ | |
Electrical connection | silicon soft wire | |
Compensation temp. | -10℃～70℃ | |
Operating temp. | -40℃～120℃ | |
Storage temp. | -40℃～120℃ | |
Insulation resistance | ≥200MΩ/250VDC | |
Response time | ≤1ms (up to 90%FS) | |
Measured medium | All the liquids and gases compatible with 316L. | |
Mechanical vibration | 20g (20～5000Hz) | |
Shock | 20g（20～5000HZ） | |
Service life | 10×106 (cycles) | |
Production process
Testing Equipment
Certificate
Company profile
Company advantage
Mass production
We have one production center in Nanjing and one production center in Anshan with 20,000㎡plant and 170 units of production equipments. The main annual capacity of sensors is about 2,000,000 pieces.
Imported equipments
We imported 20 sets of pressure controller and 150 units of testing ovens to our production line.
Informatization management
We have the information management system of CRM, PLM, ERP, MES and DINGDING etc.
Comprehensive testing
We have our own lab and testing equipment such as lightning stroke, surging, static electricity, vibration, high-low temperature impact test and helium mass-spectrum leak detection.
